$10-100 /Piece/Pieces
| Payment Type: | L/C,T/T,Paypal |
| Incoterm: | FOB,CFR,CIF,EXW,Express Delivery |
| Min. Order: | 1 Piece/Pieces |
| Transportation: | Ocean,Land,Air,Express |
| Port: | Shenzhen |
Model No.: XPTN-9000-SFP1.25G
Brand: Scodeno
Product Status: Stock
Communication Mode: Full-Duplex &Amp; Half-Duplex
Certification: Fcc, Ce, Gs, Rohs, Sgs, Bis（isi）
Place Of Origin: China
Operating Temperature (℃): -20℃~85℃
Application: 1.25gb/S 1000base-Lx Ethernet;1.06 Gb/S Fibre Channel
Operating Relative Humidity: 5%-95%
Center Wavelength: 1260.1310.1360.
| Selling Units | : | Piece/Pieces |
| Package Type | : | Normal Package |
| Picture Example | : |
|
| Download | : |
|
Product Description:
1. Feature:
l SFP package with LC connector
l 1310nm FP laser and PIN photo detector
l Up to 20Km transmission on SMF
l +3.3V single power supply
l LVPECL compatible data input/output interface
l Low EMI and excellent ESD protection
l laser safety standard IEC-60825 compliant
l Compatible with RoHS
l Digital Diagnostic SFF-8472 compliant
l Signal Ground Isolated to Case
2. Application:
l 1.25Gb/s 1000Base-LX Ethernet
l 1.06 Gb/s Fibre Channel
l 3. Absolute Maximum Ratings:
| Parameter | Symbol | Minimum | Maximum | Units |
| Storage Temperature | Tst | -40 | +85 | °C |
| Supply Voltage | Vcc | 0 | +3.6 | V |
| Operating Relative Humidity | RH | 5 | 95 | % |
4. Operation Environment:
| Parameter | Symbol | Min | Typical | Max | Units |
| Supply Voltage | Vcc | 3.15 | 3.3 | 3.45 | V |
| Operating Case Temperature | Tc | 0 |
| +70 |
|
| Power Dissipation |
|
|
| 1 | W |
| Data Rate |
|
| 1.25 |
| Gbps |
5. Optical Characteristics:(Ambient Operating Temperature 0°C to +70°C, Vcc =3.3 V)
| Parameter | Symbol | Min. | Typ. | Max. | Units |
| Transmitter Section | |||||
| Center Wavelength | lo | 1260 | 1310 | 1360 | nm |
| Spectral Width(RMS) | Dl | - | - | 4 | nm |
| Average Output Power | Po | -9 | - | -3 | dBm |
| Extinction Ratio | Er | 8 | - |
| dB |
| Rise/Fall Time(20%~80%) | Tr/Tf |
|
| 300 | ps |
| Total jitter | Tj |
|
| 0.43 | UI |
| Optical Eye Diagram | IEEE 802.3z and ANSI Fibre Channel Compatible | ||||
| Receiver Section | |||||
| Center Wavelength | lo | 1260 |
| 1620 | nm |
| Receiver Sensitivity | Rsen |
|
| -22 | dBm |
| Receiver Overload | Rov | -3 |
|
| dBm |
| Return Loss |
| 12 |
|
| dB |
| LOS Assert | LOSA | -36 |
|
| dBm |
| LOS Dessert | LOSD |
|
| -23 | dBm |
| LOS Hysteresis |
| 0.5 |
| 5 |
|
6. Electrical Characteristics:(Ambient Operating Temperature 0°C to +70°C, Vcc =3.3 V)
| Parameter | Symbol | Min. | Typ. | Max. | unit | |
| Transmitter Section | ||||||
| Input Differential Impendence | Zin | 90 | 100 | 110 | Ohm | |
| Data Input Swing Differential | Vin | 500 |
| 2400 | mV | |
| TX Disable | Disable |
| 2.0 |
| Vcc | V |
| Enable |
| 0 |
| 0.8 | V | |
| TX Fault | Assert |
| 2.0 |
| Vcc | V |
| Deassert |
| 0 |
| 0.8 | V | |
| Receiver Section | ||||||
| Output differential impendence | Zout |
| 100 |
| Ohm | |
| Data Input Swing Differential | Vout | 370 |
| 2000 | mV | |
| Rx_LOS | Assert |
| 2.0 |
| Vcc | V |
| Deassert |
| 0 |
| 0.8 | V | |
7. EEPROM INFORMATION（A0）:
| Addr | Field Size (Bytes) | Name of Field | HEX | Description |
| 0 | 1 | Identifier | 03 | SFP |
| 1 | 1 | Ext. Identifier | 04 | MOD4 |
| 2 | 1 | Connector | 07 | LC |
| 3-10 | 8 | Transceiver | 00 00 00 02 12 00 0D 01 | Transmitter Code |
| 11 | 1 | Encoding | 01 | 8B10B |
| 12 | 1 | BR, nominal | 0D | 1250M bps |
| 13 | 1 | Reserved | 00 |
|
| 14 | 1 | Length (9um)-km | 14 | 20km |
| 15 | 1 | Length (9um) | 64/C8/FF |
|
| 16 | 1 | Length (50um) | 00 |
|
| 17 | 1 | Length (62.5um) | 00 |
|
| 18 | 1 | Length (copper) | 00 |
|
| 19 | 1 | Reserved | 00 |
|
| 20-35 | 16 | Vendor name | 57 49 4E 54 4F 50 20 20 20 20 20 20 20 20 20 20 | WINTOP |
| 36 | 1 | Reserved | 00 |
|
| 37-39 | 3 | Vendor OUI | 00 00 00 |
|
| 40-55 | 16 | Vendor PN | xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx | ASC II |
| 56-59 | 4 | Vendor rev | 31 2E 30 20 | V1.0 |
| 60-61 | 2 | Wavelength | 05 1E | 1310nm |
| 62 | 1 | Reserved | 00 |
|
| 63 | 1 | CC BASE | XX | Check sum of byte 0~62 |
| 64-65 | 2 | Options | 00 1A | LOS, TX_DISABLE, TX_FAULT |
| 66 | 1 | BR, max | 32 | 50% |
| 67 | 1 | BR, min | 32 | 50% |
| 68-83 | 16 | Vendor SN | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | Unspecified |
| 84-91 | 8 | Vendor date code | XX XX XX 20 | Year, Month, Day |
| 92-94 | 3 | Reserved | 00 |
|
| 95 | 1 | CC_EXT | XX | Check sum of byte 64~94 |
| 96-255 | 160 | Vendor specific |
|
|
8. Diagnostics:
| Parameter | Range | Accuracy | Unit | Calibration |
| Temperature | 0 ~ 70 | ±3 | ºC | Internal |
| Voltage | 0 ~ VCC | 0.1 | V | Internal |
| Bias Current | 10 ~ 80 | ±2 | mA | Internal |
| Tx Power | -9 ~ -3 | ±2 | dBm | Internal |
| Rx Power | -28~-3 | ±3 | dBm | Internal |
9. Pin Description:
| Pins | Name | Discription | NOTE |
| 1 | VeeT | Transmitter Ground |
|
| 2 | Tx Fault | Transmitter Fault Indication | 1 |
| 3 | Tx Disable | Transmitter Disable | 2 |
| 4 | MOD DEF2 | Module Definition 2 | 3 |
| 5 | MOD DEF1 | Module Definition 1 | 3 |
| 6 | MOD DEF0 | Module Definition 0 | 3 |
| 7 | Rate Select | Not Connected |
|
| 8 | LOS | Loss of Signal | 4 |
| 9 | VeeR | Receiver Ground |
|
| 10 | VeeR | Receiver Ground |
|
| 11 | VeeR | Receiver Ground |
|
| 12 | RD- | Inv. Received Data Output | 5 |
| 13 | RD+ | IReceived Data Output | 5 |
| 14 | VeeR | Receiver Ground |
|
| 15 | VccR | Receiver Power |
|
| 16 | VccT | Transmitter Power |
|
| 17 | VeeT | Transmitter Ground |
|
| 18 | TD+ | Transmit Data Input | 6 |
| 19 | TD- | Inv. Transmit Data Input | 6 |
| 20 | VeeT | Transmitter Ground |
|
Notes:
1. TX Fault is an open collector output, which should be pulled up with a 4.7k~10kΩ resistor on the host board to a voltage between 2.0V and Vcc+0.3V. Logic 0 indicates normal operation; logic 1 indicates a laser fault of some kind. In the low state, the output will be pulled to less than 0.8V.
2. TX Disable is an input that is used to shut down the transmitter optical output. It is pulled up within the module with a 4.7k~10kΩ resistor. Its states are:
Low (0~0.8V): Transmitter on
(>0.8V, <2.0V): Undefined
High (2.0~3.3V): Transmitter Disabled
Open: Transmitter Disabled
3. MOD-DEF 0,1,2 are the module definition pins. They should be pulled up with a 4.7k~10kΩ resistor on
the host board. The pull-up voltage shall be VccT or VccR.
MOD-DEF 0 is grounded by the module to indicate that the module is present
MOD-DEF 1 is the clock line of two wire serial interface for serial ID
MOD-DEF 2 is the data line of two wire serial interface for serial ID
4. LOS is an open collector output, which should be pulled up with a 4.7k~10kΩ resistor on the host board to a voltage between 2.0V and Vcc+0.3V. Logic 0 indicates normal operation; logic 1 indicates loss of signal. In the low state, the output will be pulled to less than 0.8V.
5. These are the differential receiver output. They are internally AC-coupled 100Ω differential lines which should be terminated with 100Ω (differential) at the user SERDES.
6. These are the differential transmitter inputs. They are AC-coupled, differential lines with 100Ω differential termination inside the module.
FAQ :
Q: Are you manufacturer or trading company?
A: Manufacturer, and industry network total solution provider.
Q: Do you accept ODM/OEM?
A: Yes. We provide customized service.
Q: What is your minimum order quantity?
A: MOQ is 1 unit.
Q: What’s the payment type?
A: T/T, L/C,Western Union, Money Cram, Credit Card, Alipay, Cash.
Q: What’s the accepted trade terms?
A: EXW, FOB, CIF, FAS, CIP, FCA, CPT, DED, etc.
Q: How about shipping time?
A: Within 3-15 days after receiving full payment , but if you need OEM/ODM, the lead time depends on the specific specifications of the product.
Q: How about after-sales service?
A: 7/24 hours online and respond to user's field device problems in time.
Q: How about the warranty?
A: 5 years.
Whatsapp: +8613827465388
Address: 2F, Building A6, Silicon Valley Power Digital Park, Dafu Road, Guanlan, Shenzhen, Guangdong China
Website: https://www.scodenonet.com
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Contact Now